Stihl FC MM Instruction Manual - Page 11

Using the Unit Edging English 481BA002 KN 90° 481BA005 KN Your FC-MM power edger MultiTool is designed to produce sharp contoured edges around lawns. It will cut almost all types of grass, weeds and soft green plants. Preparations If the soil is very dry, spray it with water before you start work: this softens the soil a little and also reduces the amount of dust created. Slightly damp green plants are easier to cut. WARNING Clear away all obstacles and solid objects from the work area. N Plan the best route for edging. 481BA000 KN Operate the MultiEngine with FC-MM edger in the forward direction only. The blade may only be mounted and operated in one position. Arrows on the blade show the required direction of rotation - see chapter on "Mounting the MultiTool". WARNING Never work without the deflector! The deflector ensures that cuttings and other debris are directed away from the machine and operator. 481BA004 KN N Secure the handlebar in the normal operating position. N Start the engine. N Start the cut at no less than half throttle and continue cutting at full throttle. N Hold and guide your edger so that the blade is vertical. N Cut steadily so that the engine is not lugged down - do not apply force. N Cut at no more than a normal walking pace. N Do not push the blade into the ground. N Always walk forwards when cutting, do not pull the unit towards you. N Edge at a steady pace to avoid having to make several passes. FC-MM 9