Stihl FC MM Instruction Manual - Page 3

Original Instruction Manual Contents MultiSystem 2 Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Using the Unit 9 Approved MultiEngines 10 Mounting the MultiTool 10 Starting / Stopping the Engine 11 Storing the Machine 12 Maintenance and Care 12 Main Parts 13 Specifications 14 Maintenance and Repairs 14 Disposal 14 Trademarks 15 English Allow only persons who fully understand the manuals of the MultiEngine and edger MultiTool to operate this power tool combination. To receive maximum performance and satisfaction from your STIHL MultiTool, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your MultiTool. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in the two manuals. WARNING Because a MultiEngine equipped with an edger MultiTool is a power tool with a relatively fast turning attachment some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. © ANDREAS STIHL AG & Co. KG, 2020 0458-481-8621. VA2.D20. 0000000578_008_GB FC-MM This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1