Stihl FS 100 RX Product Instruction Manual - Page 25
Starting / Stopping the, Engine
View all Stihl FS 100 RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Starting / Stopping the Engine Control handle Controls 7 4 5 3 6 2 STOP- START STOP Symbol on slide control 7 h - stop symbol and arrow. To stop the engine, push the slide control in the direction of the arrow on the stop symbol (h) to STOP-0. Starting N Press down the trigger lockout lever and squeeze the throttle trigger. N and hold them in that position. N Move the slide control to START and hold it there. N Now release the throttle trigger, slide control and trigger lockout in that order. This is the starting throttle position. English g if the engine is cold e for warm start - also use this posi- tion if the engine has been running but is still cold. N Press the fuel pump bulb (9) at least five times - even if the bulb is filled with fuel. Starting 552BA014 KN 1 1 Throttle trigger lockout 2 Throttle trigger 3 Slide control Positions of slide control 4 STOP-0 - engine off - the ignition is switched off 5 F - normal run position - the engine is running or can start 6 START - the ignition is switched on - the engine can start 9 8 N Set the choke knob (8): FS 100 RX 002BA181 KN 249BA057 KN N Place the unit on the ground: It must rest securely on the engine support and the deflector. Check that the cutting attachment is not touching the ground or any other obstacles. N Make sure you have a safe and secure footing. N Hold the unit with your left hand and press it down firmly - your thumb should be under the fan housing. Do not stand or kneel on the drive tube. 23 552BA015 KN