Stihl FS 55 R Product Instruction Manual - Page 22

English Securing the Loop Handle Fitting the Carrying Ring Mounting the Deflector A 9 4 10 The carrying ring comes standard with the machine or is available as a special accessory. Mounting the Deflector 1 1 3 N Secure the loop handle (4) approx. 8 in (20 cm) (A) forward of the control handle (9). N Line up the loop handle. N Tighten down the screws firmly - lock the nuts if necessary. The sleeve (10) (not fitted on all models) must be between the loop handle and the control handle. 1 2 For position of carrying ring see "Main Parts". N Place the clamp (1) against the drive tube with the tapped hole on the left (viewed from engine). N Squeeze the two ends of the clamp together and hold in that position. N Insert the M6x14 screw (2). N Line up the carrying ring. N Tighten down the screw firmly. 2 3 1 Deflector for mowing attachments 2 Deflector for mowing heads Deflectors (1) and (2) are both mounted to the gearbox in the same way. N Place the deflector on the gearbox flange. N Insert the screws (3) and tighten them down firmly. 002BA147 KN 002BA142 KN 002BA380 KN 20 FS 55, FS 55 C, FS 55 R, FS 55 RC