Stihl FSE 60 Product Instruction Manual - Page 17
Mounting the Loop Handle, Mounting the Deflector
View all Stihl FSE 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
238BA003 KN English / USA Mounting the Loop Handle Mounting the Deflector A 1 2 Moving loop handle to most comfortable position : Loosen the screw (4). : Slide the loop handle along the drive tube to the required position. : Tighten the screw firmly. 2 1 4 5 238BA002 KN 40 mm 3 (1.57 in) Mounting the loop handle : Fit the loop handle (1) over the drive tube at a distance A of about 12" (30 cm) in front of the control handle (2). : Insert the hex nut (3) in the loop handle and fit screw (4) with washer (5) from the other side. Tighten down firmly. 4 3 : Push deflector (1) onto clamp (2) as far as stop. : Fit locknut (3) in the hex recess on the deflector. : Make sure the holes line up. : Insert and tighten down screw (4). 238BA004 KN 16 FSE 60