Stihl FSE 60 Product Instruction Manual - Page 19

Mounting STIHL AutoCut C 5-2, Mowing Head, Adjusting Nylon Line - deflector

Get Stihl FSE 60 PDF manuals and user guides View all Stihl FSE 60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

English / USA 282BA002 KN 282BA003 KN 282BA004 KN 1 3 2 4 6 2 Schnur/LINE 1 5 Schnur/LINE 2 2 1 Mounting STIHL AutoCut C 5-2 Mowing Head : Slide the mowing head (1) over the shaft (2) and engage hexagon recess (3) on external hexagon (4). : Screw the spool (5) clockwise until the two arrow points are in alignment - secure the spool in this position. : Fit cap (6) in the spool, press it down as far as stop and rotate it clockwise at the same time. : Rotate cap as far as stop and tighten down by hand. Adjusting Nylon Line STIHL AutoCut : Hold the rotating mowing head horizontal to the ground - tap it on the ground - about 1 1/4" (3 cm) fresh line is advanced. : The blade (1) on the deflector (2) trims surplus line to the correct length. Avoid tapping the head more than once. Line feed operates only if both lines are at least 1" (2.5 cm) long. 18 FSE 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
18
English / USA
FSE 60
Mounting STIHL AutoCut C 5-2
Mowing Head
:
Slide the mowing head (
1
) over the
shaft (
2
) and engage hexagon
recess (
3
) on external hexagon (
4
).
:
Screw the spool (
5
)
clockwise until
the two arrow points are in
alignment – secure the spool in this
position.
:
Fit cap (
6
)
in the spool, press it
down as far as stop and rotate it
clockwise at the same time.
:
Rotate cap as far as stop and
tighten down by hand.
Adjusting Nylon Line
STIHL AutoCut
:
Hold the rotating mowing head
horizontal to the ground – tap it on
the ground – about
1 1/4" (3 cm)
fresh line is advanced.
:
The blade (
1
) on the deflector (
2
)
trims surplus line to the correct
length. Avoid tapping the head more
than once.
Line feed operates only if
both
lines
are at least
1" (2.5 cm)
long.
3
2
1
282BA002 KN
4
5
282BA003 KN
Schnur/LINE
2
Schnur/LINE
1
2
6
1
282BA004 KN
2