Stihl HL 100 K 0 Product Instruction Manual - Page 16
Using the Hedge Cutter
View all Stihl HL 100 K 0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English / USA Using the Hedge Cutter Mounting the Gearbox : Loosen the clamp screws (9). : Push the drive tube (5) into the gearbox (10) - turn the gearbox back and forth as necessary. Do not use your hedge cutter during rest periods customary in the neigborhood. Preparations Use lopping shears to cut out thick branches first. Always wear a harness.. Cutting sequence If a radical cut is necessary, cut a little at a time in several stages. : Once the end of the drive tube is inserted beyond the slot in the clamp (11), push it fully home as far as stop. : Fit the clamp screws and tighten down moderately. : Line up the gearbox (10). : Tighten down the clamp screws firmly. Cutting techniques Vertical cut: Swing the cutter bar up and down in an arc as you move along the hedge - use both sides of the cutting blades. Horizontal cut: Hold the cutter bar at an angle of 0° to 10° as you swing the hedge cutter horizontally. Swing the cutter bar in an arc towards the outside of the hedge so that the cuttings are swept on to the ground. Do not throw cuttings in the rubbish bin (garbage can) - they can be composted! HL 100 15