Stihl HL 90 Product Instruction Manual - Page 17

Opening the filler cap Starting / Stopping the Engine Controls N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling 2 Take care not to spill fuel while fueling and do not overfill the tank. Closing the filler cap 2709BA003 KN 7 4 5 3 6 1 STOP- START STOP English Symbol on slide control 7 h - stop symbol and arrow. To stop the engine, push the slide control in the direction of the arrow on the stop symbol (h) to STOP-0. Starting the Engine N Press down the trigger lockout lever and squeeze the throttle trigger N and hold them in that position. N Move the slide control to START and hold it there. N Now release the throttle trigger, slide control and trigger interlock in that order. This is the starting throttle position. 002BA181 KN N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 2709BA004 KN 1 Throttle trigger lockout 2 Throttle trigger 3 Slide control Positions of slide control 4 STOP-0 - engine off - the ignition is switched off 5 F - normal run position - the engine is running or can start 6 START - the ignition is switched on - the engine can start 9 8 N Set the choke knob (8) 249BA057 KN HL 90 K 15