Stihl HL 90 Product Instruction Manual - Page 3

Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Contents Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Using the Unit 11 Mounting the Gearbox 12 Adjusting the Throttle Cable 13 Fuel 13 Fueling 14 Starting / Stopping the Engine 15 Operating Instructions 17 Cleaning the Air Filter 18 Engine Management 18 Adjusting the Carburetor 18 Spark Arresting Screen in Muffler 19 Spark Plug 19 Lubricating the Gearbox 20 Sharpening Instructions 21 Storing the Machine 21 Maintenance and Care 22 Main Parts 24 Specifications 25 Maintenance and Repairs 26 Disposal 27 STIHL Incorporated Federal Emission Control Warranty Statement 27 STIHL Incorporated California Exhaust and Evaporative Emissions Control Warranty Statement 29 Trademarks 31 English Allow only persons who fully understand this manual to operate your hedge cutter. To receive maximum performance and satisfaction from your STIHL hedge cutter, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your hedge cutter. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because a hedge cutter is a high-speed cutting tool some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. © ANDREAS STIHL AG & Co. KG, 2015 0458-445-8621-D. VA0.C15. 0000000917_011_GB { HL 90 K This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1