Stihl KM 110 R Product Instruction Manual - Page 12
Mounting the Bike Handle, Removing Clamp Moldings, Mounting the Handlebar - trimmer
![]() |
View all Stihl KM 110 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Mounting the Bike Handle English / USA The following STIHL KombiTools may be mounted on the KombiEngine KombiTool FS-KM FS-KM 1) HL-KM 0/90° 1) 2) HL-KM 135° 1) 2) HL-KM 0° 2) FH-KM 1) HT-KM 2) BF-KM 1) FCB-KM 2) FCS-KM 2) KB-KM 2) KW-KM 2) Purpose Brushcutter with mowing head Brushcutter with grass cutting blade Hedge trimmer, adjustable Hedge trimmer, adjustable Hedge trimmer Power scythe Pole pruner Pick tine cultivator Power edger Bristle brush PowerSweep 1) Barrier bar must be mounted on loop handle 2) Unsuitable or not approved for KombiEngines with bike handle Removing Clamp Moldings : Hold the lower clamp (1) and upper clamp (2) firmly. : Release the wing screw (3). The clamps are loose once the wing screw has been released. They are pushed apart by the two springs (4 and 5). : Pull out the wing screw. Washer (6) remain at the tommy screw . : Separate the clamps. Springs (4) and (5) remain in the lower clamp. A 7 1 Mounting the Handlebar : Place the handlebar (7) in the lower clamp (1) so that distance A is no more than 6 in (15 cm). : Place the upper clamp in position and hold both clamps together. : Push the wing screw, with washer, through the two clamps as far as stop - hold all parts together and secure them. 250BA046 KN KM 110, KM 130 11
![](/manual_guide/products/stihl-km-110-r-product-instruction-manual-39338fe/12.png)