Stihl KM 110 R Product Instruction Manual - Page 14

Adjusting the Throttle Cable, Swiveling the Handlebar

Get Stihl KM 110 R PDF manuals and user guides View all Stihl KM 110 R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

002BA163 KN 249BA017 KN Adjusting the Throttle Cable English / USA A properly adjusted throttle cable is the precondition for correct operation in the full throttle, starting throttle and idle positions. Adjust the throttle cable only after the unit is fully assembled - the control handle must be in the normal operating position. STOP 2 1 : Press down the trigger interlock (1) and squeeze the throttle trigger (2) (full throttle) - this sets the throttle cable correctly. Swiveling the Handlebar Transport position: : Release the wing screw (3) and unscrew it until the handlebar (7) can be turned clockwise. : Turn the handlebar 90° and then swing the handles down. : Tighten down the wing screw firmly. Working position: : Reverse the sequence described above to swing the handles up and turn the handlebar counterclockwise. : Use a suitable tool to push the slide to the bottom of the slot (see illustration). KM 110, KM 130 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
13
KM 110, KM 130
English / USA
Swiveling the Handlebar
Transport position:
:
Release the wing screw (
3
) and
unscrew it until the handlebar (
7
)
can be turned clockwise.
:
Turn the handlebar 90° and then
swing the handles down.
:
Tighten down the wing screw firmly.
Working position:
:
Reverse the sequence described
above to swing the handles up
and turn the handlebar counter-
clockwise.
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
control handle must be in the normal
operating position.
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
Press down the trigger interlock (
1
)
and squeeze the throttle trigger (
2
)
(full throttle) – this sets the throttle
cable correctly.
Adjusting the Throttle Cable
002BA163 KN
STOP
249BA017 KN
1
2