Stihl KM 91 R Product Instruction Manual - Page 12
Mounting the Loop Handle
View all Stihl KM 91 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Mounting the Loop Handle A barrier bar is supplied with the machine. Attach the barrier bar to the loop handle. 4 2 3 5 2 6 7 1 1 N Insert square nuts (1) in the barrier bar (2) - the holes must line up N Insert the clamp (3) in the loop handle (4) and position them together on the shaft (5) N Position clamp (6) N Position barrier bar (2) - note position! N Line up the holes N Insert bolts (7) in the holes - and screw them into the barrier bar as far as possible A 8 4 9 N Fit the loop handle (4) at a distance of (A) approx. 20 cm (8 in) forward of the control handle (8) N Orient the loop handle N Tighten the bolts - lock the nuts if necessary The sleeve (9) is present depending on the country and must be located between the loop handle and control handle. Always leave the barrier bar attached. 002BA098 KN 002BA099 KN 002BA353 KN 10 KM 91 R