Stihl KM 91 R Product Instruction Manual - Page 15

Starting / Stopping the, Engine

Page 15 highlights

0000-GXX-0478-A0 Opening the filler cap Starting / Stopping the Engine Controls Starting the Engine English 2709BA003 KN 3 1 0000-GXX-0477-A0 N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. Closing the filler cap N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 2709BA004 KN 2 1 Throttle trigger lockout 2 Throttle trigger 3 Stop switch with Run and Stop positions. Depress the stop switch (...) to switch off the ignition - see "Function of stop switch and ignition system". Function of stop switch and ignition system The ignition is switched off and the engine stopped when the stop switch is pressed. The stop switch returns automatically to the Run position when it is released: The ignition is switched on again after the engine stops - the engine is then ready to start. N Press the manual fuel pump bulb (9) at least five times - even if the bulb is already filled with fuel. N Press in the choke knob (8) and turn it to the position that suits the engine temperature: g if the engine is cold < for warm start - also use this posi- tion if the engine has been running but is still cold. The choke knob must engage in position. KM 91 R 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

KM 91 R
English
13
Opening the filler cap
N
Turn the cap counterclockwise until
it can be removed from the tank
opening.
N
Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the filler cap
N
Position cap.
N
Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
Controls
1
Throttle trigger lockout
2
Throttle trigger
3
Stop switch with
Run
and
Stop
positions. Depress the stop switch
(
) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the
Run
position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
N
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is already filled with fuel.
N
Press in the choke knob (8) and turn
it to the position that suits the engine
temperature:
The choke knob must engage in
position.
2709BA003 KN
2709BA004 KN
Starting / Stopping the
Engine
2
1
3
0000-GXX-0477-A0
g
if the engine is cold
<
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
0000-GXX-0478-A0