Stihl KM 91 R Product Instruction Manual - Page 16

Other Hints on Starting

Get Stihl KM 91 R PDF manuals and user guides View all Stihl KM 91 R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

English Cranking N Place the power tool on the ground so that it rests on the machine support: Check that the working tool is not touching the ground or any other obstacles - see also "Starting / Stopping the Engine" in the KombiTool instruction manual. N Make sure you have a safe and secure footing. N Hold the unit with your left hand and press it down firmly - your thumb should be under the fan housing. NOTICE Do not stand or kneel on the drive tube. 14 0000-GXX-1319-A0 0000-GXX-1674-A0 N Hold the starter grip with your right hand. N Pull the starter grip slowly until you feel it engage and then give it a brisk strong pull. NOTICE Do not pull out the starter rope all the way - it might otherwise break. N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. N Continue cranking until the engine runs. As soon as the engine runs N Press down the throttle trigger lockout and open the throttle - the choke knob moves to the run position F. After a cold start, warm up the engine by opening the throttle several times. 0000-GXX-1558-A0 0000-GXX-1318-A0 WARNING There is a risk of injury if the KombiTool runs when the engine is idling. Adjust the carburetor so that the KombiTool does not run when the engine is idling - see "Adjusting the Carburetor". Your machine is now ready for operation. Stopping the Engine N Depress the momentary contact stop switch - the engine stops - release the stop switch - it springs back to the run position. Other Hints on Starting Engine stalls in cold start position g or under acceleration. N Move the choke knob to < and continue cranking until the engine runs. Engine does not start in warm start position < N Move the choke knob to g and continue cranking until the engine runs. If the engine does not start N Check that all settings are correct. N Check that there is fuel in the tank and refuel if necessary. N Check that the spark plug boot is properly connected. N Repeat the starting procedure. KM 91 R

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
KM 91 R
English
14
Cranking
N
Place the power tool on the ground
so that it rests on the machine
support: Check that the working tool
is not touching the ground or any
other obstacles – see also "Starting
/ Stopping the Engine" in the
KombiTool instruction manual.
N
Make sure you have a safe and
secure footing.
N
Hold the unit with your left hand and
press it down
firmly
– your thumb
should be under the fan housing.
NOTICE
Do not stand or kneel on the drive tube.
N
Hold the starter grip with your right
hand.
N
Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way –
it might otherwise break
.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking until the engine
runs.
As soon as the engine runs
N
Press down the throttle trigger
lockout and open the throttle – the
choke knob moves to the run
position
F
. After a cold start, warm
up the engine by opening the
throttle several times.
WARNING
There is a risk of injury if the KombiTool
runs when the engine is idling. Adjust
the carburetor so that the KombiTool
does not run when the engine is idling –
see “Adjusting the Carburetor”.
Your machine is now ready for
operation.
Stopping the Engine
N
Depress the momentary contact
stop switch – the engine stops –
release the stop switch – it springs
back to the run position.
Other Hints on Starting
Engine stalls in cold start position
g
or
under acceleration.
N
Move the choke knob to
<
and
continue cranking until the engine
runs.
Engine does not start in warm start
position
<
N
Move the choke knob to
g
and
continue cranking until the engine
runs.
If the engine does not start
N
Check that all settings are correct.
N
Check that there is fuel in the tank
and refuel if necessary.
N
Check that the spark plug boot is
properly connected.
N
Repeat the starting procedure.
0000-GXX-1674-A0
0000-GXX-1319-A0
0000-GXX-1318-A0
0000-GXX-1558-A0