Stihl MM 55 Instruction Manual - Page 15

232BA046 KN 002BA036 KN 469BA033 KN Fueling Starting / Stopping the Engine Controls 65 4 START 3 7 STOP Before fueling, clean the filler cap and the area around it to ensure that no dirt falls into the tank. Always thoroughly shake the mixture in the canister before fueling your machine. 2 1 English Symbol on slide control 7 h - stop symbol and arrow. To stop the engine, push the slide control in the direction of the arrow on the stop symbol (h) to STOP-0. Starting N Swing bike handle into working position - see "Adjusting the Bike Handle" N Press down the trigger lockout lever and squeeze the throttle trigger N and hold them in that position. N Move the slide control to START and hold it there. N Now release the throttle trigger, slide control and trigger lockout in that order. This is the starting throttle position. WARNING In order to reduce the risk of fire and personal injury from escaping gas vapor and fumes, remove the fuel filler cap carefully so as to allow any pressure build-up in the tank to release slowly. WARNING After fueling, tighten fuel cap as securely as possible by hand. 1 Throttle trigger lockout 2 Throttle trigger 3 Slide control Positions of slide control 4 START - ignition is switched on - the engine can start 5 F - normal run position - the engine is running or can start 6 STOP-0 - engine off - the ignition is switched off 8 9 MM 55, MM 55 C N Set the choke lever (8) to 13