Stihl MM 55 Instruction Manual - Page 3
Contents - carburetor
View all Stihl MM 55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Contents MultiSystem 2 Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Approved MultiTools 11 Adjusting the bicycle handle 11 Fuel 11 Fueling 13 Starting / Stopping the Engine 13 Extra weight 15 Wheels 16 Operating Instructions 17 Replacing the Air Filter 18 Engine Management 18 Adjusting the Carburetor 19 Spark Plug 20 Engine Running Behavior 21 Storing the Machine 21 Inspections and Maintenance by Dealer 22 Maintenance and Care 23 Main Parts 24 Specifications 25 Maintenance and Repairs 26 Disposal 26 Limited Warranty 27 STIHL Incorporated Federal Emission Control Warranty Statement 27 Trademarks 29 English Allow only persons who fully understand the manuals of the MultiEngine and the MultiTool to operate your power tool. To receive maximum performance and satisfaction from your STIHL power tool, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your power tool. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in the two manuals. WARNING Because this MultiEngine is the engine for a high-speed power tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Make sure your unit is equipped with the proper deflector for the type of cutting attachment being used. Always wear proper eye protection. © ANDREAS STIHL AG & Co. KG, 2016 0458-469-8621-C. VA1.M16. 0000000537_009_GB { MM 55, MM 55 C This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1