Stihl MS 290 STIHL FARM BOSS Product Instruction Manual - Page 43
Standard setting, Adjusting idle speed
View all Stihl MS 290 STIHL FARM BOSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
English / USA H 3/4 L 1/4 HL LA Adjusting idle speed Engine stops while idling : Turn the idle speed adjusting screw (LA) clockwise until chain begins to run - then back off the screw one quarter of a turn. Chain runs when engine is idling : Turn the idle speed adjusting screw (LA) counterclockwise until chain stops running - then turn screw another quarter turn in the same direction. H 3/4 L 1/4 HL LA Standard setting : Shut off the engine. : Check the air filter and replace if necessary. : Check the spark arresting screen and clean or replace as necessary. : Turn the high speed adjusting screw (H) counterclockwise up to the stop, i.e. 3/4 turn from max. lean setting. : Turn the low speed adjusting screw (L) clockwise up to the stop - then back off the screw one quarter of a turn. If the chain continues moving when the engine is idling, have your saw checked and repaired by your servicing dealer. Erratic idling behavior, poor acceleration Idle setting is too lean. : Turn the low speed adjusting screw (L) counterclockwise until engine runs and accelerates smoothly. 139BA013 KN 139BA013 KN 42 MS 290, MS 310, MS 390