Stihl MSE 200 Product Instruction Manual - Page 36

Motor Cooling, Storing the Machine, Checking and Replacing, Chain Sprocket

Get Stihl MSE 200 PDF manuals and user guides View all Stihl MSE 200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Motor Cooling : Use a dry brush or similar tool to clean the cooling slots at regular intervals. 100BA027 KN 000BA054 KN Storing the Machine English / USA Checking and Replacing Chain Sprocket For periods of about 3 months or longer: : Remove and clean the saw chain and guide bar, spray with corrosion inhibiting oil. : Thoroughly clean the machine, paying special attenton to the cooling slots. : If you use biological chain and bar lubricant, e.g. STIHL Bioplus, completely fill the chain oil tank. : Store the machine in a dry, high or locked location - out of the reach of children and other unauthorized persons. : Disconnect the plug from the power supply. : Remove the chain sprocket cover, chain and guide bar. Replace the chain sprocket: a - after using two chains or sooner - if the wear marks (arrow) on the sprocket are deeper than approx. 0.02 in (0.5 mm) since this would reduce the life of the chain. Use a gauge (special accessory) to check the depth of the wear marks. It is best to use two chains in rotation with one sprocket. Use only original STIHL chain sprockets. MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
35
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
English / USA
:
Use a dry brush or similar tool to
clean the cooling slots at regular
intervals.
For periods of about 3 months or longer:
:
Remove and clean the saw chain
and guide bar, spray with corrosion
inhibiting oil.
:
Thoroughly clean the machine,
paying special attenton to the
cooling slots.
:
If you use biological chain and bar
lubricant, e.g. STIHL Bioplus,
completely fill the chain oil tank.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
:
Disconnect the plug from the power
supply.
:
Remove the chain sprocket cover,
chain and guide bar.
Replace the chain sprocket:
–
after using two chains or sooner
–
if the wear marks (arrow) on the
sprocket are deeper than approx.
0.02 in (0.5 mm) since this would
reduce the life of the chain. Use a
gauge (special accessory) to check
the depth of the wear marks.
It is best to use two chains in
rotation with one sprocket.
Use only original STIHL chain sprockets.
Motor Cooling
100BA027 KN
Storing the Machine
Checking and Replacing
Chain Sprocket
a
000BA054 KN