Stihl NG 7 Bench Chain Breaker and Rivet Spinner Instruction Manual - Page 3

English Assembling the Rivet Spinner In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols described below: Warning where there is a risk of an accident or personal injury or serious damage to property. Caution where there is a risk of damaging the machine or its individual components. Note or hint which is not essential for using the machine, but may improve the operator's understanding of the situation and result in better use of the machine. Note or hint on correct procedure in order to avoid damage to the environment. Equipment and features This instruction manual may refer to several models with different features. Components that are not installed on all models and related applications are marked with an asterisk (*). Such components may be available as special accessories from your STIHL dealer. Engineering improvements STIHL's philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Therefore some changes, modifications and improvements may not be covered in this manual. 4 1 2 3 : Use two wood screws and washers to mount the base to the workbench. : Insert lever (1) in hole in eccentric pin (2) and secure with screw (3). : Screw extension (4) on to lever (1). 588BA009 KN 12 NG 7