Stihl NG 7 Bench Chain Breaker and Rivet Spinner Instruction Manual - Page 7

English Oil 1 3 7 588BA012 KN : Advance the thrust screw (1) until the shank of the rivet butts against the spinning head (3). : Apply a few drops of oil to the rivet and the face of the spinning head. : Turn the thrust screw (1) clockwise with one hand until moderate pressure is applied to the rivet. : Turn the crank handle (7) steadily with the other hand - the spinning head forms the new rivet head. Continue turning the thrust screw to maintain a constant pressure on the rivet. : Spin the rivet until the chain links are firmly connected but still flexible. The new chain link must be matched to the size and shape of the other links: : Grind back cutter and depth gauge to size of master cutter (the master cutter is the shortest cutter in the chain, see user manual of grinder). : File back surface of the new tie strap to size and shape of other links. 16 NG 7