Stihl NG 7 Bench Chain Breaker and Rivet Spinner Instruction Manual - Page 5
Example: Use recess 3/8R for, Position the chain on the die so
 |
View all Stihl NG 7 Bench Chain Breaker and Rivet Spinner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
588BA004 KN 588BA005 KN 588BA006 KN English 3 2 1 5 : Fit required punch (1) in the toolholder (2) and secure in position with grub screw (3). Improper repairs may result in damage to the chain and increase the risk of injury. Wear protective gloves when working with the saw chain to protect your hands from the sharp cutters. 4 : Place the die (4) on the base plate. : Position the chain on the die so that the cutter is on top and the tie strap is in the appropriate recess. Example: Use recess 3/8R for 3/8" Rapid. 1 : Bring down the lever (5) until the punch (1) touches the rivet. The rivet to be removed must be centered under the punch. : Push the lever down until the rivet head is pressed out. 14 NG 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
14
English
NG 7
:
Fit required punch
(1)
in the
toolholder
(2)
and secure in position
with grub screw
(3)
.
Improper repairs may result in
damage to the chain and increase
the risk of injury.
Wear protective gloves when
working with the saw chain to
protect your hands from the sharp
cutters.
:
Place the die
(4)
on the base plate.
:
Position the chain on the die so that
the cutter is on top and the tie strap
is in the appropriate recess.
Example: Use recess 3/8R for
3/8“ Rapid.
:
Bring down the lever
(5)
until the
punch
(1)
touches the rivet.
The rivet to be removed must be
centered under the punch.
:
Push the lever down until the rivet
head is pressed out.
2
588BA004 KN
1
3
588BA005 KN
4
588BA006 KN
1
5