Stihl RMA 510 Product Instruction Manual - Page 22

3901BA041 KN 3901BA019 KN English If the red LEDs glow continuously / flash A B C D 3) Electromagnetic interference or fault. Take the battery out of the power tool and refit it. Switch on the machine - if the LEDs continue to flash, the battery has a malfunction and must be replaced. 4) Electromagnetic interference or fault. Take the battery out of the machine. Use a blunt tool to remove dirt from the contacts in the battery compartment. Refit the battery. Switch on the power tool - if the LEDs still flash, the power tool has a malfunction and must be checked by a servicing dealer - STIHL recommends an authorized STIHL servicing dealer. A 1 LED glows continuously red: B 4 LEDs flash red C 3 LEDs glow continuously red: D 3 LEDs flash red Battery is too hot1) 2)/cold1) Malfunction in battery 3) Power tool is too hot - allow it to cool down. Malfunction in power tool 4) 1) When charging: Charge process starts automatically after the battery has cooled down / warmed up. 2) During operation: Power tool cuts out - allow battery to cool down; it may be necessary to take the battery out of the power tool for this purpose. LED on Charger 1 The LED (1) on the charger may glow continuously green or flash red. Green continuous light ... ... indicates the following: The battery - is being charged - is too hot and must cool down before charging See also "LEDs on battery". The green LED on the charger goes off as soon as the battery is fully charged. Red flashing light ... ... may indicate the following: - No electrical contact between battery and charger - remove and refit the battery - Malfunction in battery - see also "LEDs on Battery". - Malfunction in charger - have checked by a servicing dealer. STIHL recommends an authorized STIHL servicing dealer. 20 RMA 510