Stihl TS 460 Instruction Manual - Page 33
It may break, When the engine has turned over, for the first time, If the temperature is very low
View all Stihl TS 460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English / USA 337BA028 LA STOP 337BA010 If the carburetor has been set correctly, the abrasive wheel must not turn when the engine idles. The cut-off machine is now ready for use. Switching off 3 Set the slide control (3) to "0" i If the temperature is very low: let the engine warm up When the engine has started: : Briefly blip the throttle trigger = 4 disengage starting throttle position, - slide control returns to the normal 5 position # and the engine idles : Gently press the throttle trigger and let the engine warm up With your right hand, : slowly pull out the starter handle as far as the stop - then pull it through quickly and strongly - do not pull the rope out completely It may break! Do not let the starter handle snap back - guide it back into place vertically so that the starter rope is rewound correctly : If the engine is new, pull the starter rope through several times to ensure that sufficient fuel is delivered. When the engine has turned over for the first time: : Push the choke lever (4) in the direction opposite to the arrow Machines with decompression valve: : Press the decompression valve button (5) again before each further attempt to start the engine - continue cranking As soon as the engine is running, : briefly blip the throttle trigger once, the slide control (3) returns to the normal position # - and the engine idles 32 TS 460