Sub-Zero 632 Built-In Installation Guide - Page 23

Service - ice maker problem

Page 23 highlights

SERVICE I N F O R M AT I O N SERVICE I N F O R M AT I O N I N S TA L L AT I O N C HE C K L I ST Has the unit been secured in place with the provided anti-tip blocking kit or is there clearance of 1" (25) or less between the unit and a solid soffit? Are both front leveling legs extended down to make contact with the floor? Is the unit level? Is the power cord plugged into a properly grounded 3-prong outlet, which has been installed in accordance with all applicable electrical codes? Is the water supply connected for units with an automatic ice maker? Have you checked for leaks? Is the drain pan in the proper position? Has the kickplate been installed properly? Are panels attached securely and properly aligned? Have the door(s) been aligned for proper appearance and operation? Have all accessories been installed? Have any installation / service problems been noted on the product registration card? Has the registration card been mailed in? Have stainless steel door(s) been inspected for any imperfections? This is to be done by the dealer / installer with the customer upon completion of the installation. NOTE: Classic, platinum and carbon stainless steel panels are covered by a limited 60-day parts and labor warranty for cosmetic defects. If you need service, be sure to have the model and serial number when you call. You'll find these numbers on the model and serial number on the plate at the top frame of the unit inside the door. Contact a Sub-Zero Factory Authorized Service Center, a Sub-Zero dealer, or the Sub-Zero Customer Service Department, P. O. Box 44130, Madison, WI 53744-4130, call 800-222-7820 or e-mail [email protected]. If you are storing or disposing of your old refrigerator or freezer, please do it safely. Remove the doors or tightly secure the doors closed. Child entrapment accidents can be tragic. C ONTAC T I N FORMATION Sub-Zero Customer Service: 800-222-7820 Website: subzero.com E-mail Address: customerservice@ subzero.com The information and images in this book are the copyright property of Sub-Zero Freezer Company, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero Freezer Company, Inc. ©Sub-Zero Freezer Company, Inc. all rights reserved. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

SERVICE
INFORMATION
If you need service, be sure to have the model
and serial number when you call. You’ll find
these numbers on the model and serial
number on the plate at the top frame of the
unit inside the door.
Contact a Sub-Zero Factory Authorized Service
Center, a Sub-Zero dealer, or the Sub-Zero
Customer Service Department, P. O. Box 44130,
Madison, WI 53744-4130, call 800-222-7820 or
23
If you are storing or disposing of your old
refrigerator or freezer, please do it safely.
Remove the doors or tightly secure the
doors closed. Child entrapment accidents
can be tragic.
CONTACT
INFORMATION
Sub-Zero
Customer Service:
800-222-7820
Website:
subzero.com
E-mail Address:
customerservice@
subzero.com
SERVICE
INFORMATION
The information and images in this book are the
copyright property of Sub-Zero Freezer Company, Inc.
Neither this book nor any information or images
contained herein may be copied or used in whole or
in part without the express written permission of
Sub-Zero Freezer Company, Inc.
©Sub-Zero Freezer Company, Inc. all rights reserved.
INSTALLATION CHECKLIST
Has the unit been secured in place with the
provided anti-tip blocking kit or is there
clearance of 1" (25) or less between the unit
and a solid soffit?
Are both front leveling legs extended down
to make contact with the floor? Is the unit
level?
Is the power cord plugged into a properly
grounded 3-prong outlet, which has been
installed in accordance with all applicable
electrical codes?
Is the water supply connected for units with
an automatic ice maker? Have you checked
for leaks?
Is the drain pan in the proper position? Has
the kickplate been installed properly?
Are panels attached securely and properly
aligned?
Have the door(s) been aligned for proper
appearance and operation?
Have all accessories been installed?
Have any installation / service problems
been noted on the product registration
card? Has the registration card been
mailed in?
Have stainless steel door(s) been inspected
for any imperfections? This is to be done
by the dealer / installer with the customer
upon completion of the installation.
NOTE: Classic, platinum and carbon stain-
less steel panels are covered by a limited
60-day parts and labor warranty for
cosmetic defects.