Sub-Zero 632 Built-In Installation Guide - Page 3

B U I LT- I N I N S TA L L A T I O N R E C O M M E N D A T I O N S I N S TA L L AT I O N R E C O M M E N D AT I O N S The importance of the installation of the Sub-Zero Built-In unit cannot be overemphasized. Installation should be done by a qualified installer. Before you begin the installation process, it is recommended that you read this entire Installation Instructions book. There are key details that you should take special care to observe during the installation. By reading these instructions carefully, you will make the installation process easier, problem-free and, most importantly, safe. Any questions or problems about the installation should be directed to your Sub-Zero dealer or the Sub-Zero Customer Service Department at 800-222-7820 or e-mail [email protected]. You can also visit our website at subzero.com. TOOLS AND MATERIALS REQUIRED The following is a list of tools and materials that should be available for proper installation. Phillips screwdriver set Slotted screwdriver set Torx drive screwdriver set 4' (1.2 m) of 1/4" copper tubing and saddle valve for the water line-part #4200880 (do not use self-piercing valves) Copper tubing cutter Level-2' (.6 m) and 4' (1.2 m) recommended Appliance Dolly able to support 700 lbs (317 kg) and adequate manpower to handle the weight of the unit Various sized pliers Wrench set Allen wrench set 5/16" hex bolt nut driver Crescent wrenches Cordless drill and assorted drill bits Masonite, plywood, 1/8" pressed fiberboard, cardboard or other suitable material to protect finished flooring Appropriate materials to cover and protect the home and its furnishings during installation Dimensions in parentheses are in millimeters unless otherwise specified. 3