Sub-Zero 650 Built-In Use and Care Guide - Page 14

S U B - Z E R O B U I LT- I N U S E & C A R E R E F R I G E R ATO R S T O R A G E ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com. HIGH HUMIDITY CRISPER DRAWER To remove your high humidity crisper drawer, pull open until the drawer stops. Now raise the front of the drawer and pull it out. To reinstall, insert the drawer into the tracks with the front end raised. Refer to the illustration below. Some units also have other storage drawers, which can be removed in a similar manner. A D J U S TA B L E G L A S S S H E LV E S Be sure to read and understand the following instructions before removing or adjusting shelves. To remove or adjust shelves, first tilt the shelf up at the front, then lift it up and out of the tracks on the rear wall of the refrigerator. Refer to the illustration below. If the door is limited to a 90-degree opening, you'll need to clear the door shelves in order to remove a shelf. Lift and pivot the end of the shelf nearest the door upward, and remove. To replace a shelf, insert it in the tracks at the rear of the refrigerator with the front of the shelf raised slightly. As you push the shelf in, lower the front of the shelf until it locks into position. IMPORTANT NOTE: Always be careful in handling glass shelves to prevent breaking or scratching the interior. Glass shelves should warm to room temperature before immersing in warm water. ROLL-OUT UTILITY BASKET The utility basket rolls in and out so that you can get to small containers and food items easily. To remove the basket, pull it out, lift up on the front, then out. Refer to the illustration below. To replace the basket, insert the roller into its tracks with the front of the basket raised, and push in. If the door is limited to a 90-degree opening, you'll need to remove the entire utility basket and shelf as one unit in order to clear the door shelves. To do this, place one hand, palm up, under the basket and lift it out of the support tracks. Pivot the end of the basket assembly nearest the door upward, and remove. The utility basket is available as an option on Models 601RG, 611G and 650G. Contact your Sub-Zero dealer for details. High humidity crisper drawer removal 14 Adjustable glass shelf removal Roll-out utility basket removal