Sub-Zero 650 Built-In Use and Care Guide - Page 24

Models 611, 611G, 650 and 650G, Models 685 and 695, IMPORTANT NOTE, Models 601RG, 611G and 650G, - light cover

Page 24 highlights

S U B - Z E R O B U I LT- I N U S E & C A R E LIGHTING I N F ORM AT I O N IMPORTANT NOTE: When the refrigerator or freezer doors are left open for a long time, the lights may go off. This protects the internal parts from overheating. To reset the light system, close the door for 15 to 30 minutes. Your Sub-Zero Built-In unit contains standard 40 watt appliance bulbs (part #3030030) in refrigerator and freezer sections. OVERHEAD LIGHTING You'll need to remove the light shield in the top of the refrigerator or freezer to replace the bulbs. Place your hands under the light shield and release the two clips on the back of the light shield, then lift up and slide back slowly until the key slots on the side of the light shield drop past the mounting studs in the side walls. Then remove the shield. The bulbs are now accessible. Refer to the illustration below. Models 601RG, 611G and 650G: Like all Sub-Zero units, lights in glass door models will fully illuminate when the door is open. With the 601RG, 611G and 650G, however, you have the option of having subdued lighting even with the door closed. You can easily turn this feature off by depressing the LIGHT ON/OFF key pad on the Control Center. FREEZER LIGHTING Freezer basket lighting is located below the ice maker and mounted on the back wall of the freezer. To remove the light shield, gently compress the shield to release the top, then the bottom. The bulb is now accessible. To reinstall the shield, put the bottom in place first, then compress and insert the top. Refer to the illustration below. Models 611, 611G, 650 and 650G: Freezer lighting is in the top of the freezer, mounted to the front of the evaporator cover. The bulbs are accessible by opening the freezer drawer and unscrewing the bulb from the top front of the freezer. Models 685 and 695: Freezer lighting is accessible above the ice bucket once the freezer utility rack has been removed. See Ice Bucket Removal, page 16. Shut off power at the control panel before changing light bulbs. Wear protective gloves when handling bulbs. FREEZER COLDER WARMER COLDER WARMER REFRIGERATOR ICE ON/OFF ON/OFF UNIT ON/OFF 632 Light Shield Light Shield Locking Clip Light shield removal Freezer basket lighting 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

24
FREEZER LIGHTING
Freezer basket lighting is located below the ice
maker and mounted on the back wall of the
freezer. To remove the light shield, gently
compress the shield to release the top, then
the bottom. The bulb is now accessible. To
reinstall the shield, put the bottom in place
first, then compress and insert the top. Refer to
the illustration below.
Models 611, 611G, 650 and 650G:
Freezer
lighting is in the top of the freezer, mounted to
the front of the evaporator cover. The bulbs
are accessible by opening the freezer drawer
and unscrewing the bulb from the top front of
the freezer.
Models 685 and 695:
Freezer lighting is acces-
sible above the ice bucket once the freezer
utility rack has been removed. See Ice Bucket
Removal, page 16.
Locking±Clip
Light±Shield
FREEZER
COLDER
WARMER
COLDER
WARMER
UNIT
ON/OFF
ON/OFF
ICE
ON/OFF
REFRIGERATOR
632
Light
Shield
Light shield removal
Freezer basket lighting
SUB-ZERO
BUILT-IN
USE & CARE
LIGHTING
INFORMATION
IMPORTANT NOTE:
When the refrigerator or
freezer doors are left open for a long time, the
lights may go off. This protects the internal
parts from overheating. To reset the light
system, close the door for 15 to 30 minutes.
Your Sub-Zero Built-In unit contains standard
40 watt appliance bulbs (part #3030030) in
refrigerator and freezer sections.
OVERHEAD LIGHTING
You’ll need to remove the light shield in the
top of the refrigerator or freezer to replace the
bulbs. Place your hands under the light shield
and release the two clips on the back of the
light shield, then lift up and slide back slowly
until the key slots on the side of the light
shield drop past the mounting studs in the side
walls. Then remove the shield. The bulbs are
now accessible. Refer to the illustration below.
Models 601RG, 611G and 650G:
Like all
Sub-Zero units, lights in glass door models will
fully illuminate when the door is open. With
the 601RG, 611G and 650G, however, you have
the option of having subdued lighting even
with the door closed. You can easily turn this
feature off by depressing the
LIGHT ON/OFF
key pad on the Control Center.
Shut off power at the control panel
before changing light bulbs. Wear protec-
tive gloves when handling bulbs.