Sub-Zero 700TFI Sub-Zero Design Guide - Page 13

Built-In Refrigeration, Framed Panels

Get Sub-Zero 700TFI PDF manuals and user guides View all Sub-Zero 700TFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Built-In Refrigeration 13 subzero.com/specs Framed Panels If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6). If the panel is thicker than 1/4" (6), a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations. IMPORTANT NOTE: For framed design applications, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this section. IMPORTANT NOTE: Do not cover a glass door with a solid panel. Also, the edges of the window cut-out will need to be finished, as they will be exposed. IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be aware that rough opening dimensions are different for this application. TRIM REVEAL 1/4" (6) min 1/4" (6) PANEL MAIN FRAME DOOR TRIM REVEAL 1/4" (6) min ROUT TO 1/4" (6) MAIN FRAME DOOR Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Built-In Refrigeration
13
subzero.com/specs
Framed Panels
If the thickness of the custom panels is less than
1
/
4
"
(6)
,
they must be backed up with a sheet of shim material to
build the total thickness to
1
/
4
"
(6)
. If the panel is thicker
than
1
/
4
"
(6)
, a routed edge must be provided around the
panel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE:
For framed design applications,
routing, recessing or optional extended handles may be
required on raised panels for finger clearance under the
handle. Refer to the full-scale templates at the end of this
section.
IMPORTANT NOTE:
Do not cover a glass door with a solid
panel. Also, the edges of the window cut-out will need to
be finished, as they will be exposed.
IMPORTANT NOTE:
When installing two units in a side-by-
side application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
1
/
4
"
(6)
PANEL
TRIM
REVEAL
1
/
4
"
(6) min
DOOR
MAIN FRAME
Panels
1
/
4
"
(6)
thick or less.
Panels thicker than
1
/
4
"
(6)
.
TRIM
REVEAL
1
/
4
"
(6) min
ROUT TO
1
/
4
"
(6)
DOOR
MAIN FRAME