Sub-Zero 700TFI Sub-Zero Design Guide - Page 72

Overlay Panels, Wine Storage, Door Panels

Get Sub-Zero 700TFI PDF manuals and user guides View all Sub-Zero 700TFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Wine Storage 72 Door Panels Unless you are installing a stainless steel model, you will need to provide a frame for the glass door. If you order a stainless steel unit, models 315W, 424G, 424FSG and WS-30 will be shipped with their panels and hardware installed. For models 427G and 427RG, optional stainless steel panels or custom panels will need to be installed. The glass door is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. Also, rails and stiles can be increased in size but should not exceed the cabinet manufacturers' standard width and cannot exceed the overall door panel dimensions listed in the charts. The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frames must be finished to match the front surface. Overlay Panels MODELS 315W AND 424G The overlay panel applied to models 315W and 424G should not be confused with the built-in overlay panel application. The overlay panel will consist of just a frame and would be either the 5/8" (16) or 3/4" (19) thick panel you may be using. It is affixed directly to the door itself with screws through a series of predrilled holes in the door frame. A backer and spacer panel is not required. Model 315W and 424G can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit so that it extends 1/4" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between the door panel and adjoining cabinetry at the maximum 145° door swing. Refer to the full-scale template at the end of this section. FREESTANDING MODEL 424FSG Model 424FSG does not require any panels or surrounding cabinetry. It has a beautiful stainless steel exterior that is designed to be used in a freestanding application. Overlay Panels PANEL DIMENSIONS 315W 424G MIN WIDTH Stiles and Rails MAX PANEL WEIGHT Door Frame (315W) Door Frame (424G) MIN PANEL THICKNESS All Panels W 15" (381) 233/4" (603) H 301/16" (764) 301/16" (764) 21/4" (57) 10 lbs (5 kg) 10 lbs (5 kg) 5/8" (16)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Overlay Panels
MODELS 315W AND 424G
The overlay panel applied to models 315W and 424G
should not be confused with the built-in overlay panel
application. The overlay panel will consist of just a frame
and would be either the
5
/
8
"
(16)
or
3
/
4
"
(19)
thick panel you
may be using. It is affixed directly to the door itself with
screws through a series of predrilled holes in the door
frame. A backer and spacer panel is not required.
Model 315W and 424G can be installed flush with sur-
rounding cabinetry. Depending on the thickness of the
overlay door panel, it may be necessary to install the unit
so that it extends
1
/
4
"
(6)
beyond the front surface of sur-
rounding cabinetry. This will prevent interference between
the door panel and adjoining cabinetry at the maximum
145° door swing. Refer to the full-scale template at the
end of this section.
Wine Storage
72
Door Panels
Unless you are installing a stainless steel model, you will
need to provide a frame for the glass door. If you order a
stainless steel unit, models 315W, 424G, 424FSG and
WS-30 will be shipped with their panels and hardware
installed. For models 427G and 427RG, optional stainless
steel panels or custom panels will need to be installed.
The glass door is designed to be exposed to room air
circulation. Decorative overlays on the glass should be
kept to a minimum. Also, rails and stiles can be increased
in size but should not exceed the cabinet manufacturers’
standard width and cannot exceed the overall door panel
dimensions listed in the charts.
The back sides of rails and stiles that will be visible
through the glass door will need to be finished. Also, the
inside edges of the frames must be finished to match the
front surface.
FREESTANDING MODEL 424FSG
Model 424FSG does not require any panels or surrounding
cabinetry. It has a beautiful stainless steel exterior that is
designed to be used in a freestanding application.
Overlay Panels
PANEL DIMENSIONS
W
H
315W
15"
(381)
30
1
/
16
"
(764)
424G
23
3
/
4
"
(603)
30
1
/
16
"
(764)
MIN WIDTH
Stiles and Rails
2
1
/
4
"
(57)
MAX PANEL WEIGHT
Door Frame (315W)
10 lbs
(5 kg)
Door Frame (424G)
10 lbs
(5 kg)
MIN PANEL THICKNESS
All Panels
5
/
8
"
(16)