Sub-Zero 700TFI Sub-Zero Design Guide - Page 19

subzero.com/specs

Get Sub-Zero 700TFI PDF manuals and user guides View all Sub-Zero 700TFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Built-In Refrigeration 19 subzero.com/specs Overlay Panels The illustrations provide a cross section view of the threepanel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models. Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the following pages. IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed. IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be aware that rough opening dimensions are different for this application. SPACER PANEL OVERLAY PANEL BACKER PANEL TRIM OVERLAY PANEL SPACER PANEL BACKER PANEL 5/16" (8) min 1/8" (3) 3/4" (19) typical .10" (3) 1/4" (6) Panel assembly cross section. Panel assembly rear view. Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Built-In Refrigeration
19
subzero.com/specs
Overlay Panels
The illustrations provide a cross section view of the three-
panel assembly, showing placement of the trim and a rear
view of the three-panel assembly with critical dimensions,
standard for all built-in models.
Overlay grille panels for the panel grille match the design
of the overlay door panels. Dimensions for the grille panel
are listed in the overlay panel specifications on the follow-
ing pages.
IMPORTANT NOTE:
On glass door models, the edges of
the overlay, spacer and backer panels of the window
cut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE:
When installing two units in a side-by-
side application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
1
/
8
"
(3)
OVERLAY PANEL
SPACER PANEL
BACKER PANEL
TRIM
5
/
16
"
(8) min
Panel assembly cross section.
Panel assembly rear view.
1
/
4
"
(6)
.10"
(3)
OVERLAY
PANEL
SPACER
PANEL
BACKER
PANEL
3
/
4
"
(19)
typical
Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.