Sub-Zero 700TFI Sub-Zero Design Guide - Page 73

Wine Storage 73 subzero.com/specs Integrated Panels MODELS 427G AND 427RG The integrated full panels or frame panels for glass doors for these models will follow some of the identical planning processes used with the integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the integrated line, door panels for both models 427G and 427RG will be applied with screws applied through our door. The drawer panels for the model 427RG will be applied using the integrated technique of mounting brackets. IMPORTANT NOTE: The depth of models 427G and 427RG is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into the drywall or bring the cabinets forward. Refer to the integrated section. Panel dimensions listed in the chart assume the models finish off at 80" (2032) in height overall and have a 4" (102) toe kick for the model 427G. If you finish off at 84" (2134), for instance, you must add an additional 4" (102) to the finished height of the panel and 4" (102) to the top rail. Likewise, if you allow for a 6" (152) toe kick for the model 427G, you must subtract 2" (51) from the bottom rail. The height of the door panel for models 427G and 427RG can extend beyond the typical panel height, provided you do not exceed the panel weight limit. Refer to specifications on page 59 of the integrated section. The toe kick area on model 427G cannot be larger than 6" (152), and on model 427RG, no larger than 9" (229). The toe kick area for either model cannot be less than 4" (102). If you are installing an optional lock kit on models 427G or 427RG, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. These instructions are available on our website, subzero.com. Integrated Panels 427G Door 427RG Door Top Drawer Bottom Drawer Panel Requirements MIN WIDTH Stiles Top Rail Bottom Rail (427G) Bottom Rail (427RG) MAX PANEL WEIGHT Door Frame Drawer Panel (427RG) MIN PANEL THICKNESS All Panels W 263/4" (679) W 263/4" (679) 263/4" (679) 263/4" (679) H 757/8" (1927) H 453/8" (1153) 139/16" (345) 1611/16" (424) 21/4" (57) 33/4" (95) 8" (203) 3" (76) 20 lbs (9 kg) 12 lbs (5 kg) 5/8" (16) DUAL INSTALLATIONS For information on dual installations for models 427G and 427RG, refer to the integrated dual installations section on page 61.