Symphonic SD200E Owner's Manual - Page 17
Troubleshooting Guide - replacement remote
View all Symphonic SD200E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Information Troubleshooting Guide If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist. Problem No power No sound or picture Distorted picture Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output No DTS audio is output Picture freezes momentarily during playback Disc can't be played No return to start-up screen when disc is removed The player does not respond to the remote control Buttons do not work or player stops responding Player does not respond to some operating commands during playback DVD player cannot read CDs/DVDs Angle does not switch Playback does not start when the title is selected The password for rating level has been forgotten The PLAY indicator on the front panel flashes Solution -Check if the AC power cord is properly connected. -Unplug the outlet once, and wait for 5-10seconds and then plug it in again -Check if the TV is switched on. -Check the video connection -Check the VIDEO/AUDIO cable connections to the TV (See Connection to a TV) -Sometimes a small amount of picture distortion may appear. This is not a malfunction. -Connect the player directly to the TV. -Connect DVD player directly to the TV. -Make sure the disc is compatible with the DVD player. -Adjust the volume. -Check that the speakers are connected correctly. -Check the digital connections. -Check if the audio format of the selected audio language matches your receiver capabilities. -This player does not support DTS audio. This is not a malfunction. -Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. -Clean the disc -Clean the disc -Ensure the disc label is facing up. -Check if the disc is defective by trying another disc. -Cancel the parental lock or change the control level. -Insert a correct disc that plays on this player. -Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface. -Reset the player by switching the player off, then on again. -Aim the remote control directly at the sensor on the front of the player. -Reduce the distance to the player. -Replace the batteries in the remote control. -Re-insert the batteries with their polarities (+/- signs) as indicated. -Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then. If you hear some signal sound from the radio in response to your pressing buttons on the remote, the remote control is working. -To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. -Operations may not be permitted by the disc. Refer to the instructions of the disc. -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD player for repair. -The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. -Check the "PARENTAL" setting. -Enter the default password "4737", then your forgotten password will be cleared -An unacceptable disc is installed. Insert a playable disc. Information NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating Instruction for details on correct operations. • Playback from a desired track and random playback are not available during program playback. • Some functions are prohibited on some discs. - 17 - EN