Symphonic SV211E Owner's Manual - Page 16

SETTING THE CLOCK Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station your time sources. NOTE: You must use remote control for this procedure. In the example below, the clock is to be set to: DATE SETTING TIME Wednesday 1st March, 1995 5:40PM. 1 Press POWER/TIMER REC button on the remote control I to turn on the VCR so that SP - the "M" appears on the dis- play. 2 Press CLOCK SET button. Then, press CHANNEL/ ■ SET A or V button repeat- SP edly until the correct hour is indicated. BUH I • OH - 5:130.N.Lt. 10 3 Press CLOCK SET button. Then, press CHANNEL/ 8P SET A or V button repeatedly until the correct minute is indicated. 4 Press CLOCK SET button. Then, press CHANNEL/ SP SET A or V button repeatedly until the correct year is indicated. SUN • as 5:q0 rsA 0u" -1.9 951." 10 5 Press CLOCK SET button. Then, press CHANNEL/ ■ SET A or V button repeat- Sp edly until the correct month is indicated. 6 Press CLOCK SET button. Then, press CHANNEL/ ■ SET A or V button repeat- SO edly until the correct day is indicated. 7 Press CLOCK SET button to ■ start the clock. Although Sp seconds are not displayed, they begin counting at 00 when you press it. • 45° 03.8 1 TEc„ )0 vco, c„ 113;0 1: 5:1-10. 10 NOTES: • When unplugging the AC-cord or if there is a pow failure for more than 30 seconds flashes the display. • If the display shows an abnormal reading or no real ing, unplug the power cord for a few seconds. Th plug it back in. - 16 - *****