Symphonic SV211E Owner's Manual - Page 18

RECORDING ONE PROGRAM WHILE VIEWING ANOTHER You can record one program while viewing another. To start recording, follow steps [I] to [4] under "VIE AND RECORDING THE SAME PROGRAM" page 17. 5 Press TV/VCR button on the remote control unit to select TV so that "VCR" disappears from the display. 0:00:13 f 32 To monitor the progress of your recording, 7 Press TV/VCR button on the remote control unit so "VCR" appears on the display. 6 Set the TV to the channel you want to watch. 8 Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR. (CH.3 or 4) as Hi: 11 32 AUTOMATIC TIMER RECORDING You may set the VCR to start and end a recording while you are away. You can set seven events to record specific days, daily or weekly within a 1 year period. • VCR power must be turned on. • Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR. (CH3 or • Press TV/VCR button so that "VCR" appears on the display. • Clock must be set to the correct time and date before setting the timer. NOTE: You must use remote control for this procedure. In the example below, the timer is being set to record: DATE SETTING TIME CHANNEL TAPE SPEED Saturday 6th May, 1995 from 7:30PM to 8:30PM CH16 SLP 1 Insert a cassette tape with its safety tab in place, if necessary, rewind or fast forward the tape to the point at which you want to begin recording. Counter mode appears at counter 0:00:00 on the display. 2 Press PROG. CHECK but- II Mr; POP ton. L, SIAM F3 Press CHANNEL A or V as button repeatedly until de- START LP sired program number is dis- played. 4 Press SELECT button. (The "START" indicator pears) Then, press CHAN- NEL/SET • or V button re- ' v. peatedly until desired month Tv ""' 32 is displayed. - 18 - *****