Symphonic SV211E Owner's Manual - Page 21
Check, Start/end
![]() |
View all Symphonic SV211E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TO CHECK THE START/END TIME Aftersetting the timer, you can check the program number, Start/End time and channel number. 1 Press PROG.CHECK button. MM SIP START M0T1 1:3D PAI IS 21 Press CHANNEUSET A or ♦ button repeatedly until desired program number is displayed. MR START SAI CU "1:30 3 Press SELECT button repeatedly. SAT C14 2:31.3) . o' START SLP SAT 15 n DATE CH LJu •U TO STOP RECORDING Press STOP button on the VCR. NOTE: STOP button on the remote control unit will not function in the Automatic Timer Recording mode. HINTS • If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If the tape runsout before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The "121" indicator will flash. • If a tape is not inserted or the erase-protection tab is removed, the "121" indicator flashes and automatic timer recording cannot occur. Insert a tape that allows recording. • The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record mode. O B START SLP - 7: 3D SAT CT p. 15 Repeat steps [2] and [3] for next program number. 4 Press PROG.CHECK button to return to current timer display. rtha ' NED 5 : 50 - 21 - EN ***** 5A09
![](/manual_guide/products/symphonic-sv211e-owners-manual-a133d30/21.png)