Symphonic TVCR9F1 Owner's Manual - Page 18

PLAYBACK Power must be turned on. Insert a cassette into the cassette compartment. NOTE: If the erase-protection tab has been removed, the TVNCR will start playback automatically. If playback does not begin automatically, press PLAY button. SUPER HIGH SPEED SEARCH (LP/SLP MODE) For Visual Search in super high speed: I) Press either F.FWD or REW button while the unit in the Play mode. 2) Release button. 3) Depress it again. The unit will now search in su high speed. Press PLAY button to return to normal playback. NOTE: Tapes recorded in the SP or LP mode will play a noise bar on the TVNCR screen and the pic may revert to Black and White. This is normal. Press STOP button when playback is completed. VISUAL SEARCH (SP/LP/SLP MODE) You may view a video tape at a high speed in either a forward or reverse direction. This feature is useful in finding or skipping over a particular scene on a tape. Forward Direction: When inthe Play mode,pressF.FWDbutton to view the tape at a fast speed in the forward direction. The sound will be muted. Reverse Direction: To view the tape at a fast speed in the reverse direction, press REW button. The sound will be muted. Press PLAY button to return to normal playback. NOTE: The picture will not be as good as in normal playback during Visual Search. STILL PICTURE DURING PLAYBA If you press PAUSE/STILL button during the mode, the picture will "freeze" on the TVNCR sc You may use this feature to study a particular see (Only tapes recorded in the SLP mode will show least amount of lines.) Press PLAY button to continue playback. NOTE: The TVNCR will automatically switch to Stop mode, if it is left in the Pause/Still mode for than five minutes. NOISE CANCELLING If you use the PAUSE/STILL button to freeze the ture during playback with tapes recorded in the mode, usually there will be video "noise bars" on TVNCR screen. This is normal, however, this TVNCR has a s feature that allows you to reposition or reduce theI. Each time you press PAUSE/STILL button the will change position on the TVNCR screen. This ables you to see the picture in its entirety without tracting noise lines. If the tape was originally recordedin the SPorLP the still picture may, in addition to the "noise revert to black and white. This is normal. - I8- ***