Symphonic VR60WF Owner's Manual - Page 16
Delete, Channels, Channel, Again, Selecting, Language
View all Symphonic VR60WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
TO DELETE CHANNELS The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can later add the deleted channel into the memory again.) NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL A or V button. CHANNEL SET UP AGAIN • Be sure to check that the POWER and the VCR/TV indicators are both on. • Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. CCH+ 4 [Back of the VCR] n menu Press the MENU button until the main menu appears. -MENU 1 - TIMER PROGRAMMING AUTO REPEAT (OFF) PICTURE SELECT ► CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUTO SATELLITE LINK up" Press the PLAY/A or STOP/V button to point to "CHAN NEL SET UP". Then, press the F.FWD/110- button. Selec, Press the PLAY/A or STORY button to point to "MANUAL SETUP". Then, press the F.FWD/Ilis- button. CHANNEL SET UP AUTO SET UP I. MANUAL SET UP Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record. 1) Press the MENU button until the main menu appears. 2) Press the PLAY/A or STOP/V button to point to "CHANNEL SET UP". Then, press the F.FWD/II- but- ton. 3) Confirm "AUTO SET UP" is pointed to, then press the F.FWD/10- button. After scanning, the tuner stops at the lowest memorized channel. CHANNEL SET UP ► AUTO SET UP MANUAL SET UP • The VCR distinguishes between standard TV channels and cable channels. I urn_ Press the number buttons or the PLAY/A or STOP/V button until your desired channel number appears. (Example: CH30) MANUAL SET UP CHANNEL / 0 ( TV ) SELECTING THE LANGUAGE If you want to change the language on the TV screen, follow the steps below: Note: This function effects only the language on the screen menu and not the audio source. 1) Press the MENU button until the main menu appears. 5 Delete it from memory 2) Press the PLAY/A or STOP/V button to point to "LANGUAGE SELECT". Then, press the Press the F.FWD/10- or REW/1 button so that "DE- F.FWD/110. button. LETE" flashes on the TV screen. LANGUAGE SELECT • To delete another channel, repeat steps [4] and [5]. ! 3) Select "ENGLISH" or "ESPANOL"= Spanish using I. ENGLISH ESPANOL (ON) • If you press the F.FWD/10- or REW/411 button again, the PLAY/A or STOP/V but- the channel is memorized again. ton. MANUAL SET UP CHANNEL . 30 ( TV ) "" - DELETED - MANUAL SET UP CHANNEL r d.! TV - MEMORIZED - 4) Press the RESET/EXIT button to return to TV mode. NOTE: If for some reason the menu is in Spanish, press the MENU button until the main menu appears, press the PLAY/A button to point to "SELEC. IDIOMA", press the F.FWD/1,- button, press the PLAY/A button to point to , "ENGLISH", then press the RESET/EXIT button. Press the RESET/EXIT button to return to TV mode. - 16- EN 9H10