Symphonic VR60WF Owner's Manual - Page 22

INDEX SEARCH This feature provides a method of indexing a recording starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording, OTR, and recording by Auto Satellite Link. • The index mark will not be recorded if the PAUSE/STILL button is pressed and released during recording. • The time gap between making the index marks on the tape should be greater than 1 minute for SP recording and 3 minutes for SLP recording. Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs. Select "INDEX SEARCH" mode Press the INDEX SEARCH button on the remote control. *MC ARial"...:WHASMXII.MillthaMINMINP.MIIM 2 Enter your desired number Press the PLAY/A , STOP/V, or INDEX SEARCH button until the number of programs that you want to skip appears. (Example: "03" for 3 programs) INGMEARCH • The Index Search mode will be cancelled if the procedures are not activated in 30 seconds. 3 Begin index Search Press the REW or F.FWD button. The VCR begins rewinding or fast forwarding to the beginning of desired program. NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one. CURRENT PLAYBACK PROGRAM Beginning of tape End of tape r 4Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7 3 2 1 2 3 INDEX MARK 4 After Index Search When the preset program is reached, the VCR will start playback automatically. • A video cassette must be inserted in the VCR for this function to work. • The number of Index Searches can be set up to 20. • This function will not operate in the recording mode. • When you want to cancel the Index Search while in progress, press the STOP button. - 22 - EN 9H10