Symphonic VR60WF Owner's Manual - Page 25
Touch, Recording
View all Symphonic VR60WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
OTR (One Touch Recording) This function enables you to set the recording length simply by pressing the REC/OTR button on the VCR. • Please refer to the connection you are using, through pages 10, 11, or 12 on "ANTENNA/CABLE CONNECTIONS" before continuing. • You cannot use the remote control for this function. • Be sure to check that the POWER and the VCR/TV indicators are both on. • Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. 4C-) CH3 CH4 I:0 [Back of the VCR] • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) PUSH(ES) 1 push 2 pushes 3 pushes i 17 pushes 18 pushes DISPLAY RECORDED LENGTH (normal recording) 0:30 30 minutes 1:00 60 minutes 1 i 8:00 480 minutes (normal recording) NOTE: If you have a cable box or satellite box connected to this VCR, please refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to the next step. 1 Select the chantlei to be recorded Press the number buttons on the remote control or the CHANNEL ♦ or A button. Select the tape speed Press the TAPE SPEED button on the VCR to select the desired tape speed (SP/SLP). 3 Begin OTR OTR :30) Press the REC/OTR button on the VCR as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It can be set for up to 8 hours. • Recording starts immediately when the REC/OTR button is pressed, whether you are watching the same or a different channel. • When the REC/OTR button is pressed 18 times, the VCR returns to the normal recording mode. • To stop the OTR operation, press the STOP button. • To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear.) • Recording stops when 0:00 is reached. • Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). • The TV that is connected to your VCR may be turned on or off during OTR. • If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and turn power off. - 25 - EN 9H10