TASCAM CD-A750 RS-232C Specification - Page 10

TASCAM CD-A750 RS-232C Protocol Specifications Command details The commands, data, and machine IDs described here are characters (ASCII). A command is two character bytes, a machine ID is one character byte, and each item of data is an individual character byte. The CD-A750 can use the following track numbers. However if a number not existing on the disc is specified, it will be considered an invalid command. Track number (audio CD) maximum 99 Track number (MP3 CD) maximum 999 CD functions STOP Stops the CD player of the controlled device. Command 10 Machine ID 0 Data none Return none PLAY Play starts the CD player of the controlled device. Command 11 & 12 Machine ID 0 Data none Return none READY Puts the CD player of the controlled device into the PLAY-READY mode. Command 14 Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Ready Off 0 1 Ready On ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return none SHUTTLE Puts the CD player of the controlled device in SHUTTLE mode. SHUTTLE mode will be maintained until a command such as STOP, PLAY, or READY is received. Command 16 Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Shuttle Shuttles in the forward direction. Forward 0 1 Shuttle Shuttles in the backward direction. Reverse ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return none TRAY/EJECT Opens or closes the tray of the CD player of the controlled device 10 TEAC Corporation