TASCAM CD-A750 RS-232C Specification - Page 11

TASCAM CD-A750 RS-232C Protocol Specifications Command Machine ID Data Return 18 0 none none TRACK SKIP Causes the CD player of the controlled device to skip tracks. After skipping, the device will maintain the mode in which it was when the operation began. Command 1A Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Track Skip Next Skips to the next track. 0 1 Track Skip If the current position is at the beginning of a track, Previous skips to the beginning of the previous track. If the current position is not at the beginning of a track, skips to the beginning of the current track.. ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return none CALL Causes the controlled device to locate to the call point and enter playback-ready mode. Command 1D Machine ID 0 Data none Return none AUTO CUE LEVEL PRESET Sets the Auto Cue Level of CD player of the controlled device. A return command is returned only if Sense [FF] is specified. The Auto Cue Mode setting is made using the command "AUTO CUE SELECT [30]." Command 20 Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Preset -24dB 0 1 Preset -30dB 0 2 Preset -36dB 0 3 Preset -42dB 0 4 Preset -48dB F F Sense Requests that the current preset level to be returned. ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return AUTO CUE LEVEL RETURN [A0] DIRECT TRACK SEARCH PRESET Searches for the specified track number. When this command is received while in PLAY mode, the CD player of the controlled device will enter PLAY mode after searching. If the CD player of the controlled device had been in any other mode when searching began, it will be in play ready mode after searching. Command 23 Machine ID 0 Data 4 bytes Description Remarks Data 1 Tens digit of the track number Track number 11 TEAC Corporation