TASCAM CD-A750 RS-232C Specification - Page 25

TASCAM CD-A750 RS-232C Protocol Specifications REMOTE/LOCAL SELECT Enables or disables key operations on the controlled device's own panel. A return command is returned only if Sense [FF] is specified. Command 4C Machine ID 0 or 1 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Remote Only remote operation via RS-232C will be enabled. Key operations on the device's own panel and remote controller will be disabled. 0 1 Local Remote operation and key operations on the device's own panel will be enabled. F F Sense Requests that the preset content be returned. ・ If data other than the above is received, the controlled device will transmit ILLEGAL [F2]. Return REMOTE/LOCAL SELECT RETURN [CC] ERROR SENSE Requests that error data be returned from the controlled device. If the controlled device issues an "ERROR SENSE REQUEST [F0]," you should use this command to check the content of the error. Command 78 Machine ID 0 or 1 Data none Return ERROR SENSE RETURN [F8] INFORMATION RETURN This is the return command in response to the command "INFORMATION REQUEST [0F]." It returns the software version of the controlled device. Command 8F Machine ID 0 Data 4 bytes Data 1 Tens digit of the software version Example of Data 1 - Data 4 Data 2 Ones digit of the software version 0100 Version 1.00 Data 3 First decimal place of the software version Data 4 Second decimal place of the software version Request INFORMATION REQUEST [0F] REMOTE/LOCAL SELECT RETURN This is the return command for the command "REMOTE/LOCAL SELECT [4C]." It returns the enabled or disabled status for operation of the device's panel keys. Command CC Machine ID 0 or 1 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Remote Only remote operations via RS-232C will be enabled. Key operations on the device's own panel and remote controller will be disabled. 0 1 Local Remote operations as well as operations of the device's own panel will be enabled. Request/Preset REMOTE/LOCAL SELECT [4C] 25 TEAC Corporation