TASCAM DM-24 Installation and Use Effects Manual - Page 10
Notes on using effects-Using the internal effects as inserts ii
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 - Notes on using effects-Using the internal effects as inserts (ii) Using the internal effects as inserts (ii) In this section, we look at how you change the default settings to use effect 2 as a stereo input processor using assignable send/return inserts 1 and 2. The insert will be assigned with channels 1 and 2. Again, use the I/O key (the SHIFT indicator must be lit) to access the 17 through 32 screen (soft key 2), allowing the de-assignment of the assignable returns 1 and 2 from channels 29 and 30. Again, pick a "safe" or harmless option of an input that you are not using. Next, the assignable sends and returns have to be changed from their send/return loop setting to an insert setting. Press soft key 4 to access the assignable output screen: Assignable send/returns 1 and 2 should be set to the insert mode. The insert channels (that is, the channels on which the inserts will work) should be set to channels 1 and 2 (of course, you are free to change this if you want to use other channels with this effect. In the EFFECT patch page, select Stereo as the input type for effect 2. Change the input source to ASGN INS 1 SEND (CH 1) for the left input and ASGN INS 2 SEND (CH 2) for the right input. NOTE It is important that these operations are carried out in the order here. If you try to route these assignable inserts to effect 2 (on the effect patch screen) without changing the assignable send/return mode first, a popup message appears telling you that the assignable insert is in the send/return mode. If you then try to correct this by changing the send/ return mode to the insert mode, another message appears, informing you that return 1 is currently assigned to channel 29. 10 TASCAM DM-24 Effects