TASCAM DR-70D Owners Manual - Page 14
Adjusting the input level, Using the limiter, Setting the low-cut filter
View all TASCAM DR-70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Adjusting the input level 1. Press the MENU button to open the MENU screen. 2. Turn the DATA dial to select BASIC, and press the DATA dial. The BASICscreen opens. 3. Press the 1/8, 2/7, 3// or 4/. button to select the channel for input level adjustment. 4. Turn the DATA dial to select the GAINfor the selected channel, and press the DATA dial. Using the limiter When the limiter is on, the mic input gain will be adjusted automatically according to the input level to set the recording level so that distortion does not occur even when loud sounds are input. 1. Press the MENU button to open the MENU screen. 2. Turn the DATA dial to select INPUT, and press the DATA dial. The INPUTscreen opens. 3. Press the 1/8, 2/7, 3// or 4/. button to select a channel to use the limiter on. 4. Turn the DATA dial to select the LIMITERfor the selected channel, and press the DATA dial. Setting the low-cut filter Use the low-cut filter if you want to cut noise and other sounds at low frequencies. This function can be used to reduce air-conditioning noise and unpleasant wind noise, for example. 1. Press the MENU button to open the MENU screen. 2. Turn the DATA dial to select INPUT, and press the DATA dial. The INPUTscreen opens. 3. Press the 1/8, 2/7, 3// or 4/. button to select a channel to use the low-cut filter on. 4. Turn the DATA dial to select the LOWCUTfor the selected channel, and press the DATA dial. CH1 BASIC screen 5. Turn the DATA dial to set the mic input gain. Options LOW (default), MID, HIGH, HI+PLUS 6. Repeat step 3 to 5 as necessary to set the mic input gain for each channel. 7. When finished, press the MENU button to return to the Home Screen. 8. Use the 1/L, 2/R, 3/L and 4/R knobs on the front of the unit to adjust the input levels. The level meters have a b mark as a guide at −16dB. Set the input levels so that they move centered around this mark without causing the 1/L, 2/R, 3/L and 4/R knob PEAK indicators to light red. Ch1 INPUT screen 5. Turn the DATA dial to set the limiter for mic input. Options OFF (default value) MONO LINK Meaning Limiter off Limiter on only for selected channel Limiter on for both selected and linked channels 6. Repeat step 3 to 5 as necessary to set the limiter for each channel. 7. When finished, press the MENU button to return to the Home Screen. Ch1 INPUT screen 5. Turn the DATA dial to select the cut off frequency of the low cut filter for mic input. Options: OFF (default value), 40Hz, 80Hz, 120Hz, 180HZ, 220Hz 6. Repeat step 3 to 5 as necessary to set the low-cut filter for each channel. 7. When finished, press the MENU button to return to the Home Screen. 14 TASCAM DR-70D