TASCAM DVW/D11A D11 Owners Manual - Page 17

Loading Data to and Copying from the Hard Disk Source Drive, then press

Page 17 highlights

Loading Data to and Copying from the Hard Disk Source Drive Loading Data to and Copying from the Hard Disk Source Drive Note: The following instructions apply only to the DVD Duplicator model that features a factory-installed hard disk drive (DVW-D11H). During initialization (see Step 3 on page 7), the DVD Duplicator performs a selftest to detect source drives. The DVD-ROM drive and hard disk drive will be detected as available source drives. The DVD-ROM drive is the default source drive. The internal hard disk drive was formatted and partitioned at the factory. Each partition occupies 5GB of hard disk space. The number of partitions depends on the capacity of the hard disk drive. Partitions are arranged alphabetically and initially contain no data. A set of data loaded into a partition on the hard disk drive is called an "image file." To use the hard disk drive as the source drive, you must first load an image file from a DVD onto a partition on the hard disk drive, select the partition that contains the data you want to copy, specify the hard disk drive as the source drive, then execute the copy function. 1. Insert a source DVD into the DVD-ROM drive. This disc (DVD-ROM or DVD) contains the data that you wish to copy to the partition on the internal hard disk drive. 2. Press the / buttons to select function menu [9 Image], then press the (ENT) button. The Image menu includes the Load, Delete Image, Image Info, Compare Image, Select Image, Image Src Drive and ImageFormat Info functions. 3. Press the press the / buttons to select function [9-5 Select Image], then (ENT) button to access the Select a Partition submenu. The Select a Partition submenu enables you to select a partition (A, B, C, etc.) into which to load an image file on the hard disk drive. (When the unit is shipped from the factory, the partitions on the hard disk drive contain no data.) The LCD will display a message similar to the following for each corresponding partition: Select a Partition No image in A TEAC DVD Duplicator User's Manual 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Loading Data to and Copying from the Hard Disk Source Drive
TEAC DVD Duplicator User’s Manual
9
Loading Data to and Copying from the Hard Disk Source Drive
During initialization (see Step 3 on page 7), the DVD Duplicator performs a self-
test to detect source drives. The DVD-ROM drive and hard disk drive will be
detected as available source drives. The DVD-ROM drive is the default source
drive.
The internal hard disk drive was formatted and partitioned at the factory. Each
partition occupies 5GB of hard disk space. The number of partitions depends on
the capacity of the hard disk drive. Partitions are arranged alphabetically and
initially contain no data. A set of data loaded into a partition on the hard disk drive
is called an “image file.”
To use the hard disk drive as the source drive, you must first load an image file
from a DVD onto a partition on the hard disk drive, select the partition that
contains the data you want to copy, specify the hard disk drive as the source drive,
then execute the copy function.
1.
Insert a source DVD into the DVD-ROM drive.
This disc (DVD-ROM or DVD) contains the data that you wish to copy to the
partition on the internal hard disk drive.
2.
Press the
/
buttons to select function menu
[9 Image]
, then press
the
(ENT)
button.
The
Image
menu includes the
Load, Delete Image, Image Info, Compare
Image, Select Image
,
Image Src Drive
and
ImageFormat Info
functions.
3.
Press the
/
buttons to select function
[9-5 Select Image]
, then
press the
(ENT)
button to access the Select a Partition submenu.
The Select a Partition submenu enables you to select a partition (A, B, C, etc.)
into which to load an image file on the hard disk drive. (When the unit is
shipped from the factory, the partitions on the hard disk drive contain no
data.)
The LCD will display a message similar to the following for each
corresponding partition:
Select a Partition
No image in A
Note:
The following instructions apply only to the DVD Duplicator model that
features a factory-installed hard disk drive (DVW-D11H).