TASCAM DVW/D11A D11 Owners Manual - Page 23

9 Image 9 Image The Image menu, which consists of seven functions (9.1 through 9.7), is valid only on 1x1 DVD Duplicator systems that feature a factory-installed hard disk drive. The Image menu includes Load, Delete Image, Image Info, Compare Image, Select Image, Image Src Drive, and Image Format Info functions. The data loaded onto the hard disk drive is called an "image file." 9.1 Load The factory-installed hard disk drive was partitioned and formatted at the factory. An alphabetical letter identifies each partition. Each partition is approximately 5GB in capacity. The number of partitions depends on the capacity of the hard disk drive. The Load function enables you to transfer data from the DVD-ROM drive or any DVD Writer drive to the current partition of the hard disk drive. (Note: P:A stands for partition A.) You can load as many disc images as the number of partitions available on the hard disk drive. 9.2 Delete Image Use the Delete Image function to delete an image stored in a particular partition. 9.3 Image Info Use the Image Info function to display basic information for an image file stored in a particular partition. 9.4 Compare Image Use the Compare Image function to compare the contents of a source DVD-ROM disc with the image file in the partition. 9.5 Select Image The internal hard disk drive was partitioned and formatted at the factory. An alphabetical letter identifies each partition. Each partition is approximately 5GB in capacity. The number of partitions depends on the capacity of the hard disk drive. Use the Select Image function to select an image file that is stored in a specific partition on the hard disk drive. 9.6 Image Src Drive Use the Image Src Drive function to select the DVD-ROM drive or the DVD Writer drive as the source from which you can load data into a particular partition as an image file. TEAC DVD Duplicator User's Manual 15