TASCAM DVW/D11A D11 Owners Manual - Page 18

Loading Data to and Copying from the Hard Disk Source Drive

10

TEAC DVD Duplicator User’s Manual

4.

Press the

/

buttons to select the desired partition letter.

The LCD will display partition A as the first option, but you can select any

partition letter at any time.

5.

Press the

(ENT)

button to confirm the desired partition.

The LCD will display a message similar to the following:

Set Partition To A

(If you selected partition B, the LCD will display the message:

Set Partition To B,

and so on.)

6.

Press the

(ESC)

button to return to function menu

[9 Image]

.

7.

Press the

/

buttons to select function

[9-1 Load]

, then press the

(ENT)

button to transfer data from the DVD to the specified parti-

tion on the hard disk drive.

The data (image file) on the DVD in the source drive will be copied onto the

partition you selected in Step 5.

8.

Once the data is loaded successfully, remove the source disc from the

DVD-ROM drive.

9.

Repeat Steps 1 through 8 to load additional image files from other DVDs

to other partitions, if desired.

At this point, the selected partition is the same as the one you selected in Step

5 above. If you want to copy from this partition, skip to Step 12.

If you want to copy an image file from another partition into which you have

already loaded data, continue with Step 10.

10.

Press the

/

buttons to select function

[9-5 Select Image]

, then

press the

(ENT)

button to access the Select a Partition submenu.

The Select a Partition submenu also enables you to select a partition (A, B, C,

etc.) from which you want to copy an image file.

Note:

To help you quickly locate your data in the future, TEAC recommends

that you keep track of the data that you load into each partition.

Section	Page
Safety Precautions	3
Copyright and Trademark Information	4
Piracy Statement	4
About This Manual	4
Table of Contents	5
List of Figures	7
Figure 1 . DVD Duplicator Unit Package Contents 2	7
Figure 2 . Front Panel of the DVD Duplicator Unit 3	7
Figure 3 . LCD Control Panel 3	7
Figure 4 . Rear Panel of the DVD Duplicator Unit 5	7
Figure 5 . Copy Function on LCD Panel 7	7
Figure 6 . How to Handle Compact Discs (DVD-R and DVD-RW) 26	7
Figure 7 . Ejecting the Disc Tray 27	7
Chapter 1. Introduction	9
DVD Duplicator Package Contents	10
Front Panel	11
Rear Panel	13
Chapter 2. Using the DVD Duplicator	15
Setup	15
Basic Operation	16
Copying from the Optical (DVD) Source Drive	16
Loading Data to and Copying from the Hard Disk Source Drive	17
Chapter 3. DVD Duplicator Functions	21
1 Copy	21
2 Test	21
3 Test & Copy	22
4 Verify	22
5 Compare	22
6 Prescan	22
7 Disc Info	22
8 Select Source	22
9 Image	23
9.1 Load	23
9.2 Delete Image	23
9.3 Image Info	23
9.4 Compare Image	23
9.5 Select Image	23
9.6 Image Src Drive	23
9.7 Image Format Info	24
10. Edit Track (for CD only)	24
10.1 CD to CD Edit	24
10.2 CD to HDD	24
10.3 Play Audio Track	24
10.4 Close Session	25
11 Setup	25
11.1 Language	25
11.2 CD Burn Speed	25
11.3 DVD Burn Speed	25
11.4 Read Speed	25
11.5 Auto Start Drive	25
11.6 Startup Menu	26
11.7 Auto Verify	26
11.8 Auto Compare	26
11.9 Auto Prescan	26
11.10 Eject Disc	26
11.11 Burn on the Fly	26
11.12 Burn Mode	27
11.13 Display Time	27
11.14 Button Sound	27
11.15 Device Info	27
11.16 System Info	27
11.17 Quick Erase	27
11.18 Full Erase	27
12 Advanced Setup (Adv Setup)	27
12.1 UnderRun Protect	28
12.2 Overburn	28
12.3 Read Error Skip	28
12.4 Format HDD	28
12.5 Verify HDD	28
12.6 Burn-in	29
12.7 Update Firmware	29
12.8 Compare Firmware	29
12.9 H/W Diagnostic	29
12.10 Load Default	29
12.11 CD+G	29
12.12 ISRC & MCN	29
12.13 CD-Text	30
12.14 Switch USB Mode	30
Appendix A. List of Functions	31
Appendix B. LCD Messages	32
Normal Conditions (for both DVD Duplicator models)	32
Normal Conditions (for the model that features a hard disk drive)	33
Audio Editing	33
Appendix C. About DVD-R and DVD-RW Discs	34
Handling Discs	34
Loading and Ejecting Discs	35
Appendix D. Specifications	36
Appendix E. Technical Support and Warranty	37

TASCAM DVW/D11A D11 Owners Manual - Page 18

then press the, buttons to select function

Page 18 highlights