TASCAM DVW/D11A D11 Owners Manual - Page 29
Burn-in, 12.7 Update Firmware, 12.9 H/W Diagnostic, 12.10 Load Default, 12.11 CD+G
View all TASCAM DVW/D11A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
12.6 Burn-in 12.6 Burn-in The Burn-in function runs an emulate writer function continuously. The disc in the target drive is ejected and re-inserted automatically between each test cycle. This function can be prepared to run continuously or specified to run from 1 to 1000 times. 12.7 Update Firmware The Update Firmware function updates the firmware of the interface board via CD or DVD disc. The disc must contain the required data file and be inserted in the source drive. The DVD Duplicator will locate the data and update its firmware automatically. During the update, do not turn off the power to the unit. The update process is complete after the system resets automatically and displays the main menu. 12.8 Compare Firmware The Compare Firmware function compares the current firmware version in the interface board to the update version in the disc. 12.9 H/W Diagnostic The H/W Diagnostic function detects the devices connected to the interface board, confirms functionality, and displays information about the hardware on the LCD. 12.10 Load Default The Load Default function resets all settings to factory default values. It is recommended that you reset to the default values if the DVD Duplicator fails to function properly after you make changes to the original configuration. 12.11 CD+G The CD+G function enables or disables CD+G (karaoke CD) format support. The default setting is OFF. Note: The CD+G value must be set to OFF before you can use the Track Extraction features. 12.12 ISRC & MCN The ISRC & MCN function enables or disables ISRC and MCN format support. The default setting is OFF. TEAC DVD Duplicator User's Manual 21