TASCAM IF-E100 Reference Manual - Page 4
Network function settings
View all TASCAM IF-E100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Network function settings Enabling Ethernet (Serial Mode setting) The unit can be connected to a network using its Ethernet connector, allowing external control of the unit. Telnet is the protocol that can be used. To control the unit by Ethernet, Serial Mode must be switched from RS-232C to Ethernet. 1. Select Serial Mode on the Menu screen to open the Serial mode screen. (See "Menu operation procedures" in "2 - Names and Functions of Parts" in the CD-400U/CD−400U DAB Owner's Manual.) Serial Mode < RS-232C > 2. Set the Serial Mode. Options: RS-232C (default), Ethernet Set to Ethernet to use the IF-E100 to control a CD-400U. 3. Confirm the setting and return to the Menu Screen. NOTE iiThe Serial Mode setting must be reset to "RS-232C" to control the CD-400U/CD−400U DAB externally using an RS-232C connection. iiThe Serial Mode setting is retained even when the unit is turned off. iiPress the BACK [PAIRING] button to return to the Network Set. screen without changing the setting. Network function settings The unit can be connected to a network using its Ethernet connector, allowing external control of the unit. Telnet is the protocol that can be used. Use Network Set. on the Menu screen to set the network function. Password setting Set the password (default: 400). Input up to 10 characters, using only numbers. 1. Select Network Set. on the Menu screen to open the Network Set. screen. (See "Menu operation procedures" in "2 - Names and Functions of Parts" in the CD-400U/CD−400U DAB Owner's Manual.) Network Set. < Password > 2. Select Password on the Network Set. screen to open the Password screen. Password [400 ] 3. Use the number buttons on the main unit or the remote control to input the password. The blinking character shows the cursor (editing point) where a number can be input. Turn the MULTI JOG dial or press the .// [l/;] remote control buttons to move the cursor. 4 TASCAM IF-E100 4. Press the main unit MULTI JOG dial or remote control ENTER button to confirm the setting and return to the Menu screen. NOTE iiThe Password setting is retained even when the unit is turned off. iiPress the CLEAR button to delete characters. All the numbers to the right of the cursor (editing point) will be deleted. iiPress the BACK [PAIRING] button to return to the Network Set. screen without changing the setting. IP mode setting Set the IP address setting mode. When set to Static, the IP Address, Subnet Mask, Gateway and DNS Address items are set manually. When set to Auto (DHCP), the IP Address, Subnet Mask, Gateway and DNS Address items are set automatically. Use this setting if there is a DHCP server on the network. 1. Select Network Set. on the Menu screen to open the Network Set. screen. (See "Menu operation procedures" in "2 - Names and Functions of Parts" in the CD-400U/CD−400U DAB Owner's Manual.) Network Set. < Password > 2. Select IP Mode on the Network Set. screen to open the IP Mode screen. IP Mode < Auto(DHCP) > 3. Set the IP Mode. Options: Auto (DHCP) (default), Static 4. Confirm the setting and return to the Menu Screen. NOTE iiThe IP Mode setting is retained even when the unit is turned off. iiPress the BACK [PAIRING] button to return to the Network Set. screen without changing the setting. IP address setting (IP Address) Set the IP address (default: 192.168.000.040). 1. Select Network Set. on the Menu screen to open the Network Set. screen. (See "Menu operation procedures" in "2 - Names and Functions of Parts" in the CD-400U/CD−400U DAB Owner's Manual.) Network Set. < Password > 2. Select IP Address on the Network Set. screen to open the IP Address screen. IP Address 192.168.000.040 3. Use the number buttons on the main unit or the remote control to input the IP address. The blinking character shows the cursor (editing point) where a number can be input. Turn the MULTI JOG dial or press the .// [l/;] remote control buttons to move the cursor.