TASCAM IF-E100 Reference Manual - Page 6

Remote control Remote control of this unit by Ethernet using Telnet through port 23 is possible. Required settings for Telnet connection The following settings are necessary to connect to this unit by Telnet. IP address: The IP address of the unit is shown in the IP Address screen. (See "IP address setting (IP Address)" on page 4.) Port number: 23 Password: 400 (default) This can be changed on the Password screen. (See "Password setting" on page 4.) Connecting to this unit by Telnet 1. After connecting to this unit by Telnet with the above IP address and port number, press the computer Enter key. 2. "Enter Password" will appear on the Telnet console. Input the above password and press the Enter key. 3. When login succeeds, "Login Successful" will appear on the Telnet console. NOTE iiMultiple connections are not possible. If a Telnet connection has already been made, additional connections will not be possible. iiIf an item of Network Set Is changed when there is a Telnet connection, the connection will be interrupted. iiYou can download the Telnet command protocol for CD-400U/ CD-400UDAB from the TEAC Global Site (http://teac-global. com/). Specifications Input and output Ethernet connector Connector: RJ-45 Transmission protocol: Telnet Port number: 23 Password: numbers only 10-digit maximum (default: 400) Ethernet standard: 100BASE-TX Cables: category 5e or faster. Other Dimensions 75.0 × 31.0 × 54.8 mm (width × height × depth, including protrusions) Weight 37 g Dimensional drawings NN NN NN NN 00Illustrations in this manual might differ in part from the actual product. 00Specifications and external appearance might be changed without notification to improve the product. 6 TASCAM IF-E100